Logo

The Koch Multi-Sak is an extended surface air filter designed for most medium and high efficiency air filtration systems. EPA 319 approved Multi-Saks with standard headers, and self-sealing configurations, are also available.

Multi-Sak Filters are available with two media choices, Synthetic or Microfiberglass. The Multi-Sak is capable of operating in systems with rated face velocities of 500 CFM to 3000 CFM. Available efficiencies range from 20% to 95%, and seven standard face sizes are offered.

All-purpose 3-ply MERV 8 panel filter. For use in commercial buildings, hospitals and industrial plants. Link Panels – Koch Maxi-Grid Panels are also available linked in a continuous series of panels for installation into side access filter housings. MG Link Panels allow for quick and easy installation and removal of the filter from the channel as a single unit. Link Panels eliminate the possibility of air bypass caused by gaps between filters or gaps at the end of a filter track.

3-ply MERV 8 all-white antimicrobial tackified panel with heavy duty wire support. For use in commercial buildings, hospitals, industrial plants, and paint spray booths. Link Panels – Koch Maxi-Grid Panels are also available linked in a continuous series of panels for installation into side access filter housings. MG Link Panels allow for quick and easy installation and removal of the filter from the channel as a single unit. Link Panels eliminate the possibility of air bypass caused by gaps between filters or gaps at the end of a filter track.

The Koch Multi-Flo is a rigid, extended surface air filter engineered to provide medium and high efficiency air filtration, and long filter life cycles. The Multi-Flo, because of its rigid, durable construction, is capable of operating in a wide variety of air handling systems, and is an excellent product for variable-air-volume (V.A.V.) applications where changes in airflow might render a non-rigid filter ineffective.

Multi-Flo Extended Surface Filters are available with two media choices, Synthetic or Microfiberglass.

The Koch Multi-Cell is a high efficiency, extended surface air filter designed for use in HVAC applications of all types. Rigid construction makes the Multi-Cell a superior filter in variable-air-volume (VAV) systems, or in any application where extreme conditions require additional filter strength and reliability.

The DuraMAX is a rigid, extended surface air filter, engineered to provide maximum performance and prolonged filter life cycles, even in the most difficult environments. The durable, rugged, construction of the DuraMAX make it the filter of choice in filtration systems with high velocities or variable air volumes. DuraMAX Filters are constructed with a 100% plastic frame and are completely incinerable.

DuraMAX provides an unequaled combination of low pressure drop and high efficiency through the use of our unique minipleat design. This high capacity minipleat design allows a nominal 24x24x12 filter to incorporate 194 square feet of filter media. This increased extension of the media surface area insures low pressure drop, and low resistance to airflow means lower energy costs to the user.

Another benefit of the increased media area is extremely high Dust Holding Capacity, which significantly prolongs the service life of the filter. Fewer filter changes translate into substantially reduced maintenance and disposal costs.

The DuraMAX 4V are available in five ASHRAE efficiencies — 65, 75, 85, 95 and 98%.

The DuraMAX 4VS is available in 98%.

These filters are offered in three standard sizes — 24x24x12, 20x24x12 and 12x24x12. Single or double header configurations are available.

Koch Duo-Cube filters are medium efficiency, extended surface filters constructed of 100% synthetic fibers. In order to meet the requirements found in various air handling systems, Duo-Cubes are offered in three styles; Standard, Self-Seal, and 3 Ply. All three designs are engineered to provide an excellent combination of efficiency and extended filter life cycles. Standard Duo-Cube: * Fits existing cube-type baskets with no modification to equipment. * Scrim backing provides durability and rigidity. * Constructed with 100% progressively dense synthetic media. * Superior dust holding capacity provides long filter life.

Koch Supergrade Fiberglass Air Filter Media is available in a wide range of pad and roll sizes. Because all air filtration systems are different, one standard media cannot meet every requirement. With three media depths to choose from it is possible to find the right media for any fiberglass application. Contact your Koch representative for recommendations on your system.

The filter media utilized in all MicroSafe products is treated with a highly specialized antimicrobial agent designed to effectively control microbial growth, such as mold, fungus, mildew, and bacteria, on contact. This capability to control such a wide range of micro-organisms makes the MicroSafe line an excellent frontline barrier in the effort to achieve improved Indoor Air Quality (IAQ).

Utilizing recently-developed technology, MicroSafe Antimicrobial Air Filters offer a unique and unparalleled combination of microbial abatement and high efficiency particulate filtration.

Applications: MicroSafe Antimicrobial Air Filters are designed for use in any HVAC system, and are ideal for control of micro-organisms in hospitals, nursing homes, laboratories, and commercial buildings of all types.

Multi-Test Filters are extended surface high efficiency air filters designed to fit the basket framework of the Farr HP* without modification. MT Filters are collapsible replacement cartridges, and are available in four nominal efficiency ranges: 20-30%, 45-55%, 80-90%, 90-95%.

Type AR Filter Holding Frames are designed for simple and cost effective construction of filter banks. 16 gauge galvanized steel components insure years of reliable usage and make each Type AR Frame virtually indestructible.

Series K-40 filters are engineered to provide an excellent combination of rugged construction, high quality performance, and low initial cost. The filter is a medium efficiency, extended surface pleated panel designed for use in all types of residential, commercial, and industrial air filtration systems. The value-oriented design of the Series K-40 makes it the air filter of choice in applications where filters are changed according to predetermined maintenance schedules, instead of pressure gauge readings. Series K-40 filters are offered in a wide range of popular sizes, and in thicknesses of 2″ and 4″. Features: designed for value and economy; ideal for filter service programs and preventive maintenance plans; moisture resistant; extended service life; completely disposable.

High Capacity Synthetic Overspray Media

SPRAYSTOP SHC media is designed for applications, where process control requires long filter service life, to ensure maximum production capability.

Features and Benefits

• Stack protection and emissions control for a wide range of coating materials
• Ideal choice for every type of liquid coating application where maximum service life and efficiency are critical.
• Paint-holding capacity of 2.97 pounds per square foot on high solids—exceptional value for high volume coating operations.
• Exclusive design allows paint solids to permeate the blanket from back to front; enabling full depth loading, and maximizing production time and paint removal efficiency without multiple layers of media.

PB-798-9

SprayStop STK is an extremely durable paint arrestor composed of 100% multi-denier synthetic fibers. These fibers are arranged in a progressively dense configuration, course on the air entering and becoming finer toward the air exiting side of the media. This graduated density allows paint particles to permeate the pad from the back to front. This full depth loading enables SprayStop STK to provide up to 96% removal efficiency when used to collect aerospace primers and powder coat materials. With longer service life and less down time; the unique capabilities of SprayStop STK protect against stack contamination and provide maximum achievable control of chromate-laden primers and other coating materials.

PB-693-1

SprayStop FG is designed specifically for economical Paint Overspray collection. The media is approximately 2” thick and is constructed of thousands of continuous filament glass fibers formed into a progressively dense blanket or pad. This graduated density forces paint particles to permeate the entire filter pad from back to front. Full depth loading provides longer service life and less downtime.

The upstream side of SprayStop FG is white in color, while the downstream side is tinted green to insure correct installation.

Standard Capacity Two Pocket Overspray Filter

SprayStop S Duo-Pak is designed for applications where high initial efficiency is required to control overspray emissions and longer filter life is needed to reduce the frequency of filter changes.

Features and Benefits

• Utilizes multi-denier synthetic fibers progressively layered to promote “depth loading”
• Effectively removes overspray solids from lacquers, air dry enamels, and thermo-reactive coatings
• Protects against contamination and provides maximum control of overspray discharge
• Full depth loading provides 99.8% removal efficiency
• Self-Seal header eliminates overspray bypass
• Extended surface area for extended filter life cycle
• Exceeds New NESHAP* regulations and MACT** standards

High Capacity Overspray Collection Cube

4-ply media provides maximum efficiency and maximum filter life. Can be used by itself or as a final filter. Easier and cleaner filter change outs. Versatile – Can be used in liquid or powder paint booths. Self-seal header prevents paint bypass

SprayStop Universal Cube HE is designed for all applications where higher efficiencies and fewer change-outs are required. The high efficiency of the SprayStop Universal Cube HE reduces particulate emissions and assists in attaining regulatory compliance.

Features and Benefits

• Eliminates the need for two or three stage systems
• Exceptional overspray collector for all types of coating materials
• Utilizes 4-ply multi-denier progressively layered synthetic fibers designed to maximize filter life and efficiency
• Earns the Green Icon:
• Earns LEED points
• Reduces energy cost
• Extends filter lifecycles
• Conserves resources
• Improves Indoor Environmental Quality
• Cube design makes changing filters easy and promotes a cleaner paint booth
• Versatile – Can be used in liquid or powder paint booths
• Exceeds the New NESHAP Regulations set forth by “40 CFR 63”
• High efficiency helps reduce emissions

Method 319 Paint Booth Exhaust System

SprayStop NESHAP 2 Stage System is designed for applications where the removal of overspray particulate, especially chromates, must adhere to the NESHAP* Test Method 319 for Aerospace painting and de-painting operations.

SprayStop NESHAP 2 Stage System is specifically designed for aerospace spray booths that were in use before 10-29-1996.

Features and Benefits

• Exceeds the requirements of the Code of Federal Regulations, 40 CFR 63
• Engineered to provide maximum service life and efficiency for all types of coating materials
• Self-Seal header eliminates overspray bypass
• Extended life cycle
• Filter combination provides maximum efficiency and airflow
• Exceeds New NESHAP* regulations and MACT** standards

Method 319 Paint Booth Exhaust System

SprayStop NESHAP 3 Stage System is designed for applications where the removal of overspray particulate, especially chromates, must adhere to NESHAP* Test Method 319 for Aerospace painting and de-painting operations.

SprayStop NESHAP 3 Stage System is specifically designed for aerospace spray booths that were in use after 10-29-1996.

Features and Benefits

• Exceeds the requirements of the Code of Federal Regulations, 40 CFR 63
• Engineered to provide maximum service life and efficiency for all types of coating materials
• Complies with all NESHAP* and MACT** standards
• Extended filter life cycle
• Filter combination provides maximum efficiency and airflow
• Exceeds New NESHAP* regulations and MACT** standards

The Koch KR-1 Diffusion Panel is designed to provide maximum protection against airborne migration of dirt particles that can damage a quality finish in cross-draft and down-draft paint spray booths.

Features and Benefits

• Utilizes a progressive density fiber matrix to provide exceptional performance in surface finishing operations
• Prevents particle migration and creates unparalleled holding capacity that is superior to other competitive diffusion media
• The KR-1 panel is also available in blanket and pad configurations
• Available with internal or external support grid

PB-798-5

SPRAYCLEAN DUO-PAK 550 POCKET FILTERS, with their 3-ply construction, are designed for extended filter life to reduce change frequency, and improve process control.

SPRAYCLEAN DUO-PAK 550 FILTERS utilize our exclusive new 550 media, and are available in two and three pocket configurations to provide optimum life in the most rugged conditions. This progressive density media is enhanced with an adhesive coating, specially formulated to provide exceptional holding capacity and prevent unloading. This feature makes the DUO-PAK 550 an ideal choice for use as a secondary filter in paint overspray collection systems, where superior fractional efficiency and particle retention is essential to meet MACT guidelines.

PB-594

Koch Multi-Pleat HT filters are designed for air filtr ation systems with continuous operational temper atur es up to 500° F (260°C). This product is widely used in applications such as paint, spray booths, baking systems, drying ovens, and in any system where elevated operating temperatures require a more specialized type of air filtration.

Multi-Pleat HT filters are constructed with a medium efficiency extended surface media element secured in an aluminized steel enclosure frame.

The media element is composed of a specifically formulated, extended surface glass microfiber, designed to provide superior performance without degr adation in high temperature systems. The media element is bonded to the entire interior surface of the frame to eliminate air bypass, and the radial design of each pleat insures total media utilization. The media element is supported downstream by a high temperature expanded metal grid.

This media element is enclosed in a frame constructed of 24g aluminized steel. The aluminized construction ensures against flaking during operation in high temperature applications.

• Pleated media cartridges
  perform in self-cleaning
  pulse systems or standard
  non-pulsing systems.
• Expanded metal retainer
  screens inside and outside.
• Multiple media options.Consult Bulletin No: PB-798-20

• Extended surface pleated panel
• designed for use as a prefilter in
• gas turbines, centrifugal compressor
• air intakes, and other high velocity
• systems.
• Integral pleat supports.
• High performance synthetic filter
• media.
• Media is supported by a rust resistant
• metal grid.
• Available in a wide range of standard
• and custom sizes.

ASHRAE Efficiencies: 25-30%

MERV Rating: 8

Consult Bulletin No: K-906A

• A wide range of synthetic and fiberglass media designed for use as a prefilter in gas turbines and other high velocity systems.
• Available as prefilter pads or plankets for Maxi-Cell and DuraMAX or as a wrap-around prefilter for cylindrical cartridges.
• Available media – Synthetic 1″ and 2.
• Fiberglass 2″ and 4″

ASHRAE Efficiencies: <20%

MERV Rating: 7

Consult Bulletin No: K-906C

The Koch OdorKleen ES is an extended surface pleated panel.

The filter media utilized in OdorKleen ES panels is a dual purpose multi-layer product, designed to collect airborne particulate and remove odors and other gasses from the air stream.

100% mechanical media provides high efficiency, excellent dust holding capacity throughout the filter’s lifecycle with a MERV 8 performance rating before and after conditioning steps when tested in accordance to ASHRAE Test Standard 52.2-2007. The upstream layer provides an efficiency rating of 70% for 3 to 10 micrometers. The downstream odor removal layer is impregnated with carbon media for absorption of volatile organic compounds (VOC’s) from the air stream. This carbon media carries a minimum activation of 60%, insuring high odor absorption efficiency, and extended lifecycles between filter changes.

Another Koch product widely used for odor and VOC removal is the DuraKleen High Efficiency Gas Phase Filter. DuraKleen an extended surface carbon filter which utilizes a unique technology known as Cellbond Particulate Structure to encase carbon media within a multiple layers of fibers. This unique media construction offers high efficiency, lower pressure drop, little or no dusting, and extended filter lifecycles.

Steel Construction – Koch All-Steel Filters are designed for a wide range of uses and can be used 300-600 FPM. The media consists of crimped wire and expanded metal cloth which provides superior dust catching ability. This media is enclosed in a durable metal frame.Koch Steel Filters are completely washable and are available in a wide range of sizes in depths of 1″, 2″ and 4″. They are offered with or without handles.

Aluminum Construction – Koch All-Aluminum Filters offer all the advantages of the standard metal filter with the added advantage of being extremely lightweight. The filters consist of aluminum cloth secured by expanded aluminum mesh. This media has excellent dirt holding properties because of its large surface area. A durable all-aluminum frame encloses the media and provides long lasting support for the filter. They are totally washable and are available in a wide range of sizes in depths of 1″, 2″ and 4″.

The Koch Multi-Pleat XL11 is a medium efficiency extended surface pleated panel filter, engineered to provide higher initial efficiencies and better overall performance than standard pleated filters.

The Multi-Pleat XL11 carries a MERV 11 fractional efficiency rating in accordance with ASHRAE Test Standard 52.2. The filter will also provide an Initial Dust Spot Efficiency of 45%, and an Average Dust Spot Efficiency of 55-60% in accordance with ASHRAE Test Standard 52.1.

The MERV 11 efficiency ratings provided by the Multi-Pleat XL11 make the filter an excellent upgrade from disposable filters and ordinary pleated filters in applications such as hospitals, laboratories and pharmaceutical plants, commercial office buildings, and in any system in which a higher degree of clean air is required. The Multi-Pleat XL11 is available in standard and high capacity versions.

Koch Multi-Pleat HT/Class 1 filters are designed for air filtration systems with continuous operational temperatures of 500°F and higher. This product is widely used in applications such as paint spray booths, baking systems, drying ovens, and in any system where elevated operating temperatures require a more specialized type of air filtration.

Koch Filter Corporation BioMAX HEPA Filters are designed to provide the highest level of filtration available for commercial and industrial applications. They are widely used in hospitals, clean rooms, pharmaceutical plants, and in hundreds of other systems where clean air is critical in the protection of people, processes and equipment. BioMAX HEPA Filters are constructed using the highest quality components available and are available in efficiencies of 99.97%, 99.99% and 99.999% on 0.3 micron particles. Standard construction BioMAX HEPA Filters are manufactured with galvanized steel cell sides (UL Class 1) or particle board cell sides (UL Class 2). Multiple cell side options are also available.

BioMAX HEPA Filters – Standard Capacity

Standard Capacity BioMAX Filters offer an excellent combination of high efficiency, factory tested performance, and economical initial purchase price.The filter is designed to operate under normal conditions, with the 12″ deep model capable of maintaining a pressure drop of 1.0″ w.g. at airflows up to 260 feet per minute.Standard Capacity BioMAX Filters are offered with wood or metal cell sides in efficiencies of 99.97%, 99.99%, and 99.999% on 0.3 micron particles.

BioMAX HEPA Filters – High Capacity

High Capacity BioMAX HC Filters are designed to operate in applications with higher airflows up to 500 FPM (Feet per Minute). Constructed with approximately 50% more filter media than Standard Capacity Filters, High Capacity BioMAX HC Filters can operate at velocities up to 2000 CFM with only a slight increase in pressure drop and offer several additional performance advantages: lower average pressure drop at equivalent airflows; can operate at higher airflows with only slight increase in resistance; extended media means longer service life, fewer filter changes, and reduced maintenance and disposal costs; reduced space requirements for filter banks, fewer filters required; excellent choice for new systems and renovations of existing systems. High Capacity BioMAX Filters are offered with wood or metal cell sides in efficiencies of 99.97%, 99.99%, and 99.999% on 0.3 micron particles.

High Capacity Minipleat HEPA Filters Neoprene Gasket Seal

• High Capacity design (300 sq.ft. of media in a 24x24x12″ frame) enables the filter to operate at 500 FPM with initial resistance of 1.20″ W.G.
• Standard models are furnished with the gasket on the downstream face of the filter. Gaskets can be placed upstream or on both sides of the filter upon request.
• Constructed with ten individual minipleat packs secured in a specially-designed sheet aluminum v-bank frame.

BioMAX High Temperature HEPA Filters are specially-designed for use in systems with above-normal operational temperatures. Several models are available. Please contact Customer Service at 1-800-757-5624

Multi-Cell CS Filters are rigid, extended surface panel filters designed to provide high efficiency filtration in a compact, space-saving 2″ or 4″ deep frame. Multi-Cell CS Filters can be used in any air filter application, and are especially useful for upgrading the efficiency of filtration systems which presently have limited room for expansion or modification and in high temperature applications. The compact 2″ or 4″ depth enables to user to upgrade from standard pleated filters or other 2″ and 4″ low efficiency filters with no modification of the frames or housings.